Baumit StarTrack Red allows a good adhesion without additional fixing for Baumit Open – KlimaFaçade and for Baumit ETICS
Additional mechanical fixing alternative to standard dowelling, in the case of existing old plaster. Existing old plaster up to a max. total thickness of 40 mm can be bridged over. Drill bit Ø: 8 mm.
- Façade without thermal bridges
- No “surprises” when drilling
- Perfect anchoring
Guide consumption: 6 StarTrack units per square meter. Actual consumption is dependent on the specific insulated wall uneven areas in the subsurface, with gaps and holes, increase the number of anchors used. The maximum distance between anchors in pattern 4 applies. Data: Anchoring depth in load-bearing substrate: ≥ 40 mm
Product Variants
Why to use adhesive anchors?
- Replaces mechanical anchoring by expansion anchors
-
Ensures additional fixation of the original plaster
-
Creates additional adhesive points key bound with the bearing masonry
-
Saves energy, costs and time
-
No thermal bridges
-
No stains in the place of expansion anchor discs
-
Drilling to a wall not to an insulant – drilling without any surprises
-
Reduction of construction time of the thermal insulation system
-
One type of anchors for different thickness of the insulant
-
For new constructions as well as for reconstructions
-
Especially suitable for bigger thicknesses of the insulant – low-energy and passive houses
-
For anchoring of polystyrene insulating boards
