Properties
• Productivity as its supplied as a pre-coloured mortar, requiring only the addition of water for immediate use on site
• Mechanical strength tailored for use with soft and traditional materials
• Smooth, workable texture for easy applicationExcellent adhesion to a wide range of substrates
• Ideal for both masonry and repointing applications
• Suitable for brick, clay block, raw earth, and natural stone
• Enhanced with specific admixtures that provide flexibility and make application easier
• Delivers a natural, durable, and aesthetically pleasing finish
Application Guidelines
• Water dosage: 4 L of water for a 25 kg bag – adjust depending on climate conditions and desired mortar consistency.
• Mixing time: Minimum of 5 minutes.
• Consumption: For a 10 mm layer on a brick (28 × 10 × 5 cm) with vertical joints, consumption is approx. 25 – 30 kg
Unsuitable surfaces for application
• Materials covered with paints
• Gypsum-based products (plaster)
• Wood
Technical Information
• Mix ratio: 1 : 2.5
• Grain size: 0 – 2.5 mm
• Powder density: 1.5 kg/m³
• Fresh density: 2.07 kg/m³
• Compressive strength (28 days): > 5 MPa*
*Values are indicative and may vary depending on site conditions, mixing, and application methods.








